"We have a number of dealers now across the globe. At least one has asked us for copies of the documentation so they could translate it.
Hopefully some of the others will follow suit.
You might contact CadShop - our dealer in Austria and…"
advanced rendering for AutoCAD
-
Albert D Hart
- Male
- Englewood, CO
- United States
- Blog Posts
- Discussions (326)
- Events
- Groups
- Photos (2)
- Photo Albums
- Videos (6)
Albert D Hart's Discussions
Some Documentation Nomenclature
5 Replies
I am working on the new reference manual, but I don't always know what to call things.What should I call these four sections of the Control Panel?e.g. The Lighting XXX, The Materials XXX...The…Continue
Started this discussion. Last reply by Daniel Hargreaves May 6.
Lighting Channel Names
Here is an excerpt from the new reference manual on Lighting Channel names.Please let me know if you see anything wrong, or have any suggestions.AlLighting Channel NamesLighting Channel Names make it…Continue
Started May 1
Kindle Reference Manual for nXtRender for AutoCAD
2 Replies
We have decided to start on some reference manuals - both printed and eBook, and we have the first one ready for use. …Continue
Started this discussion. Last reply by Albert D Hart Apr 30.
Translation
4 Replies
On the right between Search and Activity, you will find a new Translate section.Try it out and let me know what you think.It does not work well when there are multiple languages in a post, but it may…Continue
Started this discussion. Last reply by Daniel Hargreaves Apr 30.
Albert D Hart's Page
Latest Activity
Albert D Hart replied to Jonathan Jonas's discussion Help files
"Thanks, we'll clean that upo as well."
Albert D Hart replied to Jonathan Jonas's discussion Help files
"The on-line reference manual is working now at this URL:
http://www.nxtrender.com/wk/NXtRender_for_AutoCAD_Documentation.htm
The page on RPC is here:
http://www.nxtrender.com/wk/Using_Archvision_RPC_with_nXtRender.htm
We also have a printed…"
Albert D Hart replied to Jonathan Jonas's discussion Help files
"We are rewroking the documentation, and must have left a bad link.
I will fix it, and add another post here in a few minutes."
Albert D Hart replied to Ian Foster Griffith's discussion 6 and 8 cores ????
"If you want fast renderings, then all cores will run "flat out" while rendering.
If, for some reason, you don't want all cores active, you can limit the number of cores, or lower the priority. (And, of course, then renderings will…"
Rich Hart replied to Albert D Hart's discussion Build 326 4/18/2013
"The latest version of nXtRender for Revit - Version: LK15 can be downloaded at this link:
http://www.renderplus.com/php/download_links.php"
traian m replied to Albert D Hart's discussion Build 326 4/18/2013
"how about nxt for revit, no new version, you still have two websites, where to look for it?
regards"
Roy Hirshkowitz commented on Albert D Hart's video
Lighting Basics with nXtRender
"Yes. Information on assigning materials to ACA components can be found here near the bottom of the page."
Albert D Hart replied to norton torres's discussion I NEED BUILD 318
"It is at he bottom of he download page -,using the download tab at the top of this page"
Albert D Hart replied to Albert D Hart's discussion Who wants to try nXtRender Batch?
"If you do try out the Batch Renderer - you are trying it mostly to see if it has any features which we should pursue. It does not render everything properly yet. For example, I don't think it renders RPCs or Plants properly yet."
Rich Rosemann replied to Albert D Hart's discussion Who wants to try nXtRender Batch?
"Not being as smart as I may-or-may-not-have-been, I noticed the Plug-ins Tab on the small ribbon at the top. Low and behold, I have a nXt-Render Batch drop-down ribbon. Sometimes it's tough waking up to smell the posies.
"
Rich Rosemann replied to Albert D Hart's discussion Who wants to try nXtRender Batch?
"I minimized the Acad window and no other window existed. I have all the Acad ribbons showing but, no nXt_Render_Batch Ribbon. Do I have the latest version (MB08xa) loaded?
Thanks."
Albert D Hart replied to Albert D Hart's discussion Who wants to try nXtRender Batch?
"I'll have Rich look at it when he gets back Monday.
The Batch Renderer is not fully working yet. But it should have worked.
It runs in a separate window, so minimize AutoCAD to make sure it was not running in the background.
The Ribbon should…"
Rich Rosemann replied to Albert D Hart's discussion Who wants to try nXtRender Batch?
"Running Acad 2013 and WIn XP-64. After installing nXt_Batch_Render and opening a drawing and loading nXt, no nXt_Render_Batch Ribbon is attached to Acad.
If I run the following command at the command prompt, I get the…"
Albert D Hart replied to gustavo talpo's discussion 3d positioning on background image
"Wait and try it. Besides distortion, it also allows your to move and scale the background image - while seeing the AutoCAD screen and view in front of the background image.
You can use either the mouse or the up and down arrows to move the image,…"
Profile Information
- Your website or blog address
- http://www.nxtrender.com
Render Plus Systems
Render Plus maintains IRender nXt for SketchUp and nXt for Revit.
Albert D Hart's Photos
Albert D Hart's Videos
-
-
-
nXtRender & RPC
Added by Albert D Hart 0 Comments 0 Likes
Comment Wall (1 comment)
- At 4:05pm on September 21, 2010,
John Morse said… - Al,
I wrote a modal old style library browser that I use to let users select old plants for now. The user selects a plant and I make a mesh out of the plant wires and plunk it in the model, I do not currently allow users to modify old style plants.
Search
Translate
Latest Activity
Reggie Daniel posted a discussionDisappearing Extrusions
When I create a curved counter using a solid top and an extruded front, the extrusions disappear in the rendering. Anything that I have curved that has been extruded is gone in the rendering. Is there something that I am doing wrong here?Thanks in advance.ReggieSee More
Peter Milner replied to N` Goraw's discussion HOW DO I GET MORE MATERAILS"Use the ones you've got as a basis for creating more.
Right click on a material similar to what you want in the materials palette and select Copy and Edit. This then creates a new material based on the existing one and you can then change the…"
N` Goraw posted a discussionHOW DO I GET MORE MATERAILS
I HAVE DOWNLOADED SOME MATERIALS, BUT I NEED MORE, WHERE DO I GO TO.See More
Ian Foster Griffith replied to gustavo talpo's discussion 3d positioning on background image"Things this may help............... In WalkAbout two options
Motion:- Walkthrough - 4 arrows keys + pageup/pagedown keys = full motion for Walkthroungh
Motion:- Flyover - 4 arrows keys + pageup/pagedown keys = full motion for…"
Albert D Hart replied to Jonathan Jonas's discussion Help files"We have a number of dealers now across the globe. At least one has asked us for copies of the documentation so they could translate it.
Hopefully some of the others will follow suit.
You might contact CadShop - our dealer in Austria and…"
Alfons Akamp replied to Jonathan Jonas's discussion Help files"Wird es die Dokumentationen auch mal in Deutsch und das Buch bei Amazon auch mal in Deutsch geben???
"
Albert D Hart replied to Jonathan Jonas's discussion Help files"Thanks, we'll clean that upo as well."
© 2013 Header image courtesy Peter Milner
Powered by
